Snow World cooling Pvt Ltd.

COLD ROOM PUF PANEL

Cold room and storage chambers are delivered as a complete package of PUF panels, door with accessories and refrigeration units.

Ice Make has an adequate infrastructural facilities to produce the highly durable thermal insulated PUF panel with thickness of 60 mm to 150 mm as per demand and requirement.

Our most durable PUF panel is high energy saving owing of high thermal insulation, easy to assemble and dismantle due to long lasting cam-lock systems for an ideal arrangement of walls, corners, ceilings, floor and door frames even wall to ceiling cam-lock joints can be an added advantage to ensure ideal design of modular cold rooms & storages.

TECHNICAL SPECIFICATIONS OF PUF PANELS

THICKNESS : 60, 80, 100, 125 & 150 mm
SURFACE MATERIAL Gl Pre-Painted Sheet, S.S. Sheet (Grade 304/316 & Surface Finish 2B & Mate), GI Plain Sheet, Plain Galvanize Iron. (Inside & Outside different metal can be placed as per your requirement).
FLOOR :
(A) For Kota stone or Concrete floor, Puf Slab with both side tar felt coated.
(B) For Kota stone or Concrete floor, both side metal surface panel in which each side fits with camlock and prevent temperature loss.
(C) Aluminium Chequered Plate with Marine Ply.
(D) FRP Cladding on floor
ROOM SIZE :
(A) Length & Width Minimum 1.78 mt and Bigger size 0.146 mt in multiples as per requirement
(B) Standard Height for 60 mm thickness 2.47 mt, 80 mm-2.51 mt,100 mm-2.55 mt, 125 mm-2.60 mt, 150 mm-2.65 mt. Single Panel Height upto 12 mt and above as per your requirement.
DOOR :
(A) Flush Type : Swing Door with FRP Profile, Imported Hardware, Push Type Gasket & replaceable heater for easy door operation & long life. Opening Size : 24″x72″,30″x72″,34″x78″,46″x84″ (Door Opening W x H)
(B) Overlap Type: Teak wood frame with metal covering by using heavy duty hardware for better strength Size : 45″x84″,49″x84″,54″x84″, 60″x90″ (Door Opening W x H)
(C) Sliding Door : Ice Make Sliding Doors are delivered as complete units, easy to mount with all fittings, sliding rail and bottom guide roller etc.
Width : 1000/1200/1500/1800 mm
Height : 2100 to 3000 mm
Thickness : 80 mm

Sr. No.	Parameters	Description
1	Average PUF Density	40 ± 2 Kg/ cu.mtr/ m³
2	PUF Blowing Agent	141B (CFC free)
3	Insulation Material	Polyurethane foam
4	Temperature range	+90°C to -60°C
5	Penal Type	Discontinuous type with cam lock
6	M.O.C. Of Cam Locks	Cam locks body material HIPS and male latch is made of nylon Glass field with GI sheet reinforcement. Cam-lock panel joints easy assembly and leakage resistant, panel-to-panel joints.
7	Type Of Panel Joints	Tongue & Groove Joint with Cam lock and all side rubber gaskets
8	Corner Panel Available	12” X 12” X 162”(Maximum Length)
9	Length of wall & ceiling panel	2032 mm to 12000 mm 80” to 472.5” inch
10	Ceiling Suspension items with specs	MS bolt with thermal breaking cap PVC Round Plate 6 mm thickness x 90 mm diameter Aluminium/MS washer plate for load distribution Anchor bolt (MS) hanging bolt with 40 mm washer 2.0 mm thickness Sealing to panel MS road Clamp with an insulated crown
11	Closed cell content	90 to 95%
12	Vapour Permeability	5.5mg/PASM
13	Water Absorption	Less than 2%
14	Fire Resistance	FR Grade B2 (Fire Resistance Grade)
15	Compressive Strength at 10% Deformation	0.21 N/ sq.mm (For PUF only)
16	Tensile Strength	0.58 N/ sq.mm (For PUF only)
17	Adhesive Strength(Foam to Sheet)	2.9kg/sq.mtr
18	Panel Facing Availability	With Rib or plain on Demand (Ribs are provided for more strength)
19	Wall & Celling Panel Facing material	Pre Painted Galvanised sheet, Thickness 0.50mm Plain Galvanised sheet, Thickness 0.50mm S.S. sheet, Grade 316, 0.50mm finish 2B/ 0.6mm mate No.4 S.S sheet, Grade 304, 0.50mm finish 2B/ 0.6mm mate No.4
20	Floor Panel Facing Material	• PUF Panel with both side tarfelt sheet. • PUF Panel with both side 0.5mm GIPP sheet. • PUF Panel with outside GIPP sheet, inside 9 mm thick marine ply with 2 mm thick Aluminium Chequered Plate
21	Specification for Colour Coating	A. RAL No.: 9002/9003 or it’s nearest B. Indian Standard Code Colour Coating: IS 14246 Galvanizing : IS 277 Base Metal : IS 513 C. Organic Coating: Type RMP (Polyester) D. Zinc Coating : 120 GSM E. Top Primer (Thickness in micron ‘μ’): 5 +/- 1 μ F. Top Coat (Thickness in micron ‘μ’): 20 +/- 1 μ G. Back Primer (Thickness in micron ‘μ’): 4 +/- 1 μ H. Back Coat (Thickness in micron ‘μ’): 4 +/- 1 μ I. Guard Film (Thickness in micron ‘μ’):40 +/- 3 μ J. Salt Spray Test /Humidity Test: 750 hrs. /1000 hrs.